ETC Magnetizer – Magnetize Ferrite Magnet, Magnetic Sheet

The ETC Magnetizer (U.S. Patent No. 5,424,703) offers quick and easy magnetization of ferrite materials. You will realize pull strength competitive with strengths obtained with impulse type magnetizers that can cost thousands more.

With the ETC Magnetizer, you will benefit from continuous magnetization with:

• No Index
• No Cycle Time
• No High Voltage Danger
• No Power Consumed
• No Unmagnetized Areas from Misfires

The ETC Magnetizer performs the following functions:

• Magnetizes ferrite materials to any length as fast as they can be pulled
   through the gap by the user’s windup equipment.
• Changes pole widths or pole shape within minutes.
• Center to center pole spacing up to 18 poles per each inch of strip or
   sheet width.
• Pull strength competitive with strengths obtainable with the impulse
   type magnetizers, but with equipment costing thousands less.
• Using optimum thickness for un-backed sheet, the holding power obtainable
   with Plastalloy 1A material ranges from 21oz. per square inch (@ 18 Poles
   Per Inch) to 23oz. per square inch (@ 2 Poles Per Inch).*
• Using optimum thickness for sheet material with steel backing, holding
   power for Plastalloy 1A material ranges from 28oz. per square inch (@
   11 Poles Per Inch) to 31.5oz. per square inch (@ 4 Poles Per Inch).*
• For programming robotic equipment and sequential functions required of
   various products, strip and sheet can be magnetized in an array of
   different pole widths, from one adjacent pole to the next or with different
   center to center spacings between poles of uniform widths.
• Flat magnets can be magnetized with segment or pie shape poles, as
   suitable in relation to various product functions and applications.

For more information regarding Electrodyne’s magnet design and magnet manufacturing capabilities, call us 513-732-2822.